A Solution To Dust Removal

A solution to dust removal
The dust removal device is a device that separates the dust from the smoke, also called the dust collector or dust removal device. Dust removal equipment is the use of underground dust removal water pipe and pressure air pipe, add certain additives in the water, introduce the wind pressure, through special equipment, complete a series of technological processes, foam, through the distributor, sprinkler bracket components to spray on the dust source. The dust collected in the ash hopper can be actively discharged or manually discharged, but it must be discharged in the order defined. Early operation, often 1 day to a few days do not discharge ash, these dust on the bag, has always reached the dust collector of Tian da dust volume stop, then in order to discharge the dust collector limited dust skeleton in the use of a certain way and method, to ensure that it can play a full role in the use of.
The discharging device is compact in structure and convenient in operation. Stable operation, low noise; Because of the bearing, the tooth box is separated from the shell for a distance, for high temperature, smooth has a great improvement. The specifications of the star unloader can be designed and manufactured according to user requirements. This ash valve uses No. 00 reducer special smooth grease, please check regularly, refueling. The unloader is an important equipment for dust removal equipment, air supply and other equipment feeding. It is suitable for powder and pellet materials. The ash valve for environmental protection, metallurgy, chemical, food, food and other industrial sectors are widely used. Operating principle: When the star unloader is operating, dust falls in by gravity and fills the upper and side star blade Spaces. The blade rotor is driven by the motor through the rolling shaft of the reducer, and the impeller is transferred to the lower dust by its own weight
The discharge device is generally installed in the lower part of the dust hopper of the dust collector, in order to ensure the tightness of the connection, the upper part of the reverse discharge device should always adhere to (storage) a certain height of dust. Because when the impeller is rolling, there is often no dust on the side of the impeller after unloading the dust, so it is simple to make the air leak in. In order to maintain a certain height of the ash column, and not empty, the field is equipped with a material level signal facility in the ash bucket, and set up a chain with the motor of the dust discharge valve.