Mills, ultra-fine mills, and micro-powder mills are all ore mills. There are many parts for these ore mills. Today, Shanghai Zhuoya Mining Machinery will focus on talking about plum blossoms among them. The plum blossom frame in the ore mill is damaged, and the length of its own life has a greater relationship with maintenance and maintenance. Shanghai Zhuoya Mining Machinery will talk to you about the maintenance of the ore mill plum frame.
The main engine of the ore pulverizer drives the central shaft to rotate through the transmission device. The upper end of the central shaft is connected to the plum blossom frame, and the roller shaft is installed on the plum blossom frame. The plum blossom frame is rotated by the transmission device of the main machine, and the grinding ring is fixed. The electromagnetic vibrating feeder sends the material to the main machine in a quantitative, uniform and orderly manner, and grinds and crushes between the grinding roller and the grinding ring. .
Due to the production, the airflow enters from the lower part of the grinding ring, passes between the grinding roller and the grinding ring, and enters the wind classifier on the upper part of the equipment. There are three grinding rollers installed on the plum blossom rack, which not only rotate around the central axis, but also run with the friction of the grinding rollers. Such friction and material deposition will cause the plum blossom rack to run inflexibly.
In the production process of the ore pulverizer, the problem that is likely to occur is that the material contains iron, which causes the grinding roller and the grinding ring to be hindered during the grinding process, making the transmission device unable to rotate, and the plum blossom frame will be broken when the main machine is running. Therefore, it is strictly forbidden for iron-containing materials to enter the equipment.
When users use ore mills to process powder, they should pay attention to ensuring the equipment, and carry out the process of removing iron from the materials, so as to avoid the phenomenon that the plum blossom rack of the equipment will be damaged due to the iron in the materials.